Scarlett INDIGO IS-505, Инструкция по эксплуатации

Страница: 7 / 44

5
GB
INSTRUCTION MANUAL
• In order to avoid overheating the kettle do not pour in
more than 0.25 liters of water (below “MIN” mark). Do
not pour in more than 1.7 liters of water (above “MAX”
mark), otherwise the water may overflow through the
nozzle when it starts boiling.
•
Close the lid tightly.
3.2.BOILING
•
Place kettle with water on the power base.
• Plug the cord in the socket.
•
Press " " button to turn on the kettle.
• Light indicator “100°С” will start blinking; once the
indicator stops blinking, the kettle will start boiling the
water. Button "
" and indicator “100°С” will remain lit
during the boiling.
• Once the water starts boiling, the indicator and
the button will turn off, and the kettle will turn off
automatically.
3.3.HEATING WATER UP TO CERTAIN TEMPERATURE
• The kettle has five temperature modes. Using these
modes you may select the best temperature for brewing
various types of tea and reveal their unique taste.
•
Indicator “100ºС” will start blinking once the kettle
is turned on. You may select different temperature
modes using buttons "
". The indicator showing
the selected temperature will start blinking, and it will
remain lit during the boiling.
• Once the water reaches the selected temperature level,
the kettle will turn off automatically.
• Recommended brewing temperatures:
•
70°C- white tea
• 80°C- green tea
•
85°C - red tea
• 90°C - oolong tea
•
100°С- black tea
3.4.TEMPERATURE MAINTENANCE FUNCTION
•
Temperature maintenance function allows maintaining
the selected temperature for 120 minutes, and it helps
you avoid additional boiling.
• Press " " button.
•
Using " " buttons select the desired
temperature. The indicator reflecting the selected
temperature will start blinking.
• To turn on the temperature maintenance function press
"
" button and keep it pressed for 3 seconds.
• The temperature maintenance function will remain
active for 120 minutes. The indicator reflecting the
selected temperature will remain lit during this time.
•
In order to terminate the temperature maintenance
function press "
" button or remove the kettle from
the power base.
3.5.TURNING OFF
•
You may turn off the kettle independently by removing
it from the base or by pressing "
" button one more
time.
• ATTENTION: Your kettle is equipped with overheating
protection system. If there is too little or no water in the
kettle, it will turn off automatically. If this happens you
have to wait for at least 10 minutes until the kettle cools
off. Then you may fill the kettle with water again.
3.6.SUBSEQUENT TURN-ON
• Wait 15-30 seconds after the kettle turns off; then you
may turn it on again to boil the water.
4. CARE AND CLEANING
•
Remove the plug from the socket and let the appliance
cool down completely.
•
Open the lid and pour out the water.
• Clean the outside of the kettle and the base unit with a
soft damp cloth, then wipe with a dry cloth. Do not use
any abrasive materials.