27
When the measurement is started, once getting the time, the instrument will finish the
measurement and save the measurement result.
In the analyzer setup interface, "Ts" in every module can be set independently.
7.2.2 Run mode setup
"Run mode": the trigger source to startup, there are four modes that can be chosen: Key,
Time, Limit and Interval. The use of the startup trigger source is shown below:
"Delay": press key and the startup is delayed for a while. When the delay time is 0s,
the measurement will be started right now. When the cursor is moved to "Delay", the
parameter can be chosen from 0 to 99.
Note: When the user chooses the other startup trigger modes, the measurement can be
started by pressing key in the measurement interface.
When the cursor is moved to "Run mode", the user can enter setup interface of time run
mode by pressing or key.
b) Clock
When the mode of "Clock" is chosen, shown below:
At the left is calendar, and the right is clock, the user can set a time here. When the
calendar clock arrives the time, the instrument will be started. The cursor can moved to
year, month, day, hour, minute and second which are adjustable by pressing or
key. When one of the options is adjusted to end, there will display "**", which means this
option won’t take part in the compare. Doing so, the instrument will be started every
hour, every day, every month……
When the cursor is moved to "Run mode", the user can enter setup interface of Limit
run mode by pressing or key.
a) Key
When the mode of "Key" is chosen, shown below:
No
1
2
3
4
Remark
Press the key and startup is delayed for a while
Startup at a certain time
Startup after the same interval time
Startup when exceeding the setting limit
Source
Key + Delay
Clock
Interval
Limit
