PIN CONTROL / USE
•
PIN option factory setting is set to “Disabled” as default.
•
Default PIN : 10, 10, 10, 10
Activate PIN Function and Save New Pin (use when PIN Function not activated before)
•
Press and Hold N for 3 seconds – Red LED’s 1- 4 will now flash
•
Enter the default PIN 10,10,10,10 – The N,R and S Green LED’s will now flash
•
Press S briefly and then enter new 4 digit PIN twice – All LED’s will flash twice to confirm
change. The PIN is now saved and enabled.
Disable PIN function
•
Press and hold N for 3 seconds - Red LED’s 1- 4 will now flash
•
Enter the current user PIN or 10,10,10,10 if default - then press R to disable the PIN.
•
The system will now not require a PIN to operate.
Enable a previously disabled PIN
•
Press and hold N for 3 seconds, enter the existing user PIN number
•
Press N briefly. The system will now require the user PIN to operate.
Note:
After S, N or R has been pressed as above, the system reverts to normal operation
mode.
PIN number features:
•
If the system is locked by PIN, hold “N” for 3 seconds - LED’s 1-4 flash continually (these
LED’s flashing indicates “PIN entry mode”).
• If no PIN has been programmed yet, enter factory setting default PIN 10,10,10,10.
Otherwise enter the saved PIN.
• LED’s 1-4 will go out as you enter each digit.
• You should then see all LED’s flash twice for confirmation of correct entry. System now
unlocked. (Wrong entry indicated by all lights lit for 2 seconds)
•
If the PIN is active and after 15 minutes of no user input, the system will revert to PIN
locked in which case you will have to press N for 3 seconds and then enter the PIN
number to unlock the system.
• If the PIN is entered incorrectly 5 times in a row the buttons will be locked out for 5
minutes before a retry is allowed. All the number LEDs will light for 2 seconds if N is
pressed for 3 seconds to try and enter a PIN number during lockout period.
• Briefly pressing the power button will lock the system if the PIN is enabled.
Page 13
