SCARAB MINOR Euro 3
Page 8
Operator’s Manual
Original Issue - 19 August 2003
TILTING THE CAB
CAUTION
Before tilting the cab, ensure that there is sufficient space to do so and
that all loose items are safely stowed.
1.
Operate the cab-locking lever (located between the seats) by
moving it through approximately180°(see Fig. 2).
2.
Close the cab door and raise the cab safety latch, simultaneously
lifting the rear of the cab until it reaches its maximum tilt position.
3.
Deploy the cab prop, locating it in its retaining pocket on the
chassis rail.
CAUTION
Before lowering the cab, ensure that area below it is clear of any items
or equipment used while the cab was in the raised position.
4.
Lower the cab and engage the locking lever.
WARNING
BEFORE DRIVING THE VEHICLE, ENSURE THAT THE CAB LOCKING LEVER IS
FULLY ENGAGED IN THE LOCKED POSITION.
Fig. 2 Cab-tilt Locking Mechanism
CAB SAFETY
CAB LOCKING LEVER
LATCH
drivemanVM.fm Page 8 Tuesday, August 19, 2003 11:43 AM
