Scarab M6 Скачать руководство пользователя

Страница: 12 / 36

SCARAB M6 SWEEPER KIT

Operator’s Manual

Amdt.1 - 03 November 2009

SUCTION FAN SWITCH

- Press to start the fan. The red LED

illuminates when the fan is ON. Engine speed will automatically rise

to 1600 rpm and the fan speed (2100 rpm) will be displayed on the

LCD screen.

LEFT HAND SIDE-BRUSH SWITCH *

- Press to start the side-brush.

The red LED illuminates when selected. Brush will not deploy until the

Sweep Master switch is activated. On single-sweep machines the

non-sweeping side’s switch-backlight and LED will not illuminate.

See also side brush SWING IN/OUT switch.

LEFT HAND SUCTION NOZZLE RAISE/LOWER SWITCH

- Press to

lower the suction nozzle. Red LED illuminates when the feature is

selected. The nozzle will not deploy until the Sweep Master switch is

activated. On single-sweep machines the non-sweeping side’s

switch-backlight/LED do not illuminate.

WIDESWEEP BRUSH SWITCH *

- Press to start the widesweep brush.

The red LED illuminates when the feature is selected. The brush will

not deploy until the Sweep Master switch is activated.

RIGHT HAND SUCTION NOZZLE RAISE/LOWER SWITCH

- Press to

lower the suction nozzle. The red LED illuminates when the feature

is selected. The nozzle will not deploy until the Sweep Master switch

is activated. On single-sweep machines the non-sweeping side’s

backlight/LED do not illuminate.

RIGHT HAND SIDE-BRUSH SWITCH *

- Press to start the side-brush.

The red LED illuminates when the feature is selected. Brush will not

deploy until the Sweep Master switch is activated. On single-sweep

machines

the non-sweeping side’s switch-backlight and LED will

not illuminate. See also side brush SWING IN/OUT switch.

LEFT HAND WORK-LIGHTS

- Press to turn the work-lights ON. The

red LED illuminates when the feature is selected.

LEFT HAND SIDE-BRUSH/NOZZLE WATER SWITCH

- Press to start

the dust-suppression water jets for the side-brush and suction

nozzle. The red LED illuminates when the feature is selected. Water spray

will not function unless the Sweep Master switch is activated.

WIDE SWEEP WATER SWITCH

- Press to start the dust-suppression

water jets for the widesweep brush. The red LED illuminates when

the feature is selected. Water spray will not function unless the

Sweep Master switch is activated.

When the M6 is equipped with dual side brushes, a swivelling widesweep brush is fitted to enable

it to sweep with the selected side brush. Consequently, when the offside brush is selected while

the nearside brush is active, the nearside brush and suction nozzle will be automatically

cancelled, stopping and rising to their respective stowage positions. The widesweep will slew to

sweep with the offside brush. To reselect the nearside brush and nozzle, press the relevant

switches, at which point the offside equipment will be automatically cancelled.

Содержание M6





































Результаты поиска

Содержание M6

Отзывы:

Похожие инструкции для M6

Бренды по названию

Популярные бренды

Scarab M6, Руководство оператора

Результаты поиска

Содержание M6

Отзывы:

Похожие инструкции для M6

Бренды по названию

Популярные бренды