Scantronic iNSIGHT 20 Plus Скачать руководство пользователя страница 23

Страница: 23 / 187

Chapter 1: iNSIGHT 20 Plus Dual Purpose Scanner

User Precautions

Scantron

NSIGHT 20 Plus Scanner

User Precautions

Users and their employer need to observe the common

sense precautions applicable to the operation of any

machinery. These include, but are not limited to, the

following:
•

Do not wear loose clothing or unbuttoned sleeves.

•

Do not wear loose jewelry, bracelets, bulky rings, or

long necklaces.

•

Hair length should be kept short, using a hair net if

needed, or tying long hair up in a bundle.

•

Remove all loose objects from the area that could be

drawn into the machine.

•

Take sufficient breaks to maintain mental alertness.

•

Do not use canned/compressed air for cleaning.

Using compressed air could blow dust into difficult to

clean areas.

•

Use only the recommended cleaning supplies to

prevent damage to scanner components.

Supervisors should review their practices and make

compliance with these precautions a part of the job

description for operation of the scanner.

Содержание iNSIGHT 20 Plus




























































































































































































Результаты поиска

Содержание iNSIGHT 20 Plus

Отзывы:

Бренды по названию

Популярные бренды

Scantronic iNSIGHT 20 Plus, Руководство оператора

Результаты поиска

Содержание iNSIGHT 20 Plus

Отзывы:

Бренды по названию

Популярные бренды