Scantronic HOMELINK EXTRA, Руководство по программированию

Страница: 33 / 40

496759 Page 33
4. Press EXE
The display shows the cursor at the bottom of the
leftmost digit:
RADIO SITE CODE
01101000
5. Use the left and right arrow keys to move the cursor, and the DEL key
to delete characters that you want to change. Enter the new radio site
code as a series of “1”s and “0”s.
The displays shows the site code as you key it in,
for example:
RADIO SITE CODE
00001000
6. Press EXE.
The display shows the site code you have
entered.
RADIO SITE CODE
00001000
7. Press down arrow if you want to program Homelink with the radio site
code of a second pendant.
The display shows:
SECOND PENDANT
PENDANT LEARN
8. Repeat steps 3 to 6 for the second pendant.
Recorded Message (-53 Versions)
Homelink can record a short speech message that it will play back to any
telephone number that has Speech Only communications format selected.
The length of the message is limited to 20 seconds. Make sure that the
message contains enough information to identify the caller. When calling,
Homelink dials the number and then starts playing the message. Homelink
continues to play the message for two minutes. If during that time Homelink
receives a DTMF digit “1”, “2”, “5” or “*” from the called number then it will
stop playing the message.
Note: If the operator has opened a speech path to the Homelink then they can replay
the message by dialling “3” on a DTMF phone.
1. Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2. Press down arrow until the display shows the words “SPEECH
PLAYBACK”.
The display shows:
SPEECH PLAYBACK
'EXE' TO START
3. Press left (or right) arrow.
The display shows:
SPEECH RECORD
'EXE' TO START