1
Introduction
The 9800 Electronic Intruder Alarm system uses the latest microprocessor
technology to provide a simple to operate, yet highly flexible system,
suitable for a wide range of small to medium sized protection applications.
The system comprises a main control unit, housing the system control
printed circuit board and power supplies. Up to four remote keypads can be
connected to the system. The main control unit is normally located out of
sight and the keypad(s) fitted at appropriate locations within the premises.
The keypad(s) provide the operator with the facility to set and unset the
sytem and to programme the various operator functions described in this
manual.
The system keypads are provided with a two digit LED display providing
the user with a coded description of the system status and any system error
messages. A full list and explanation of keypad codes is provided at the back
of this manual.
Your system will have been programmed by the engineer on installation to
permit certain functions, e.g., Chime and Omit Enable. The eight available
alarm circuits will have been allocated, together with the zone allocation for
Part Set ‘B’ and ‘C’. A full description of your system is provided at the
back of this manual.
2
Содержание 9800
Страница 1: ...9 9 0 0 8 0 0 8 9 8 0 0 Microprocessor Intruder Alarm System User Guide SCANTRONIC L TD ...
Страница 28: ...Service Record REPORT ENG DATE 26 ...
Страница 29: ...Your Service Contact COMPANY NAME ADDRESS Service Telephone Number 27 ...
Страница 30: ...Manufactured in the UK by Scantronic Ltd Pt No 495665 Issue 2 SCANTRONIC L TD ...