Scantronic 9800, Руководство пользователя, Страница: 14 / 30

Straying From the Entry Route
If the user should stray from the prescribed entry route on normal entry to
the premises, a full alarm condition will occur, (external bells and internal
sounder). If your system is fitted with a remote signalling device, a signal
may be automatically transmitted to your alarm company central station.
Your system may be programmed with an ‘Abort’ feature, which works as
follows: The 9800 gives a full alarm if the user leaves the entry route or
exceeds the entry time. The 9800 sends a ‘Restore’ signal to the central
station if the user enters a valid access code at the keypad within 90 seconds
of the alarm (avoiding Police action). If the user fails to disarm the system
within 90 seconds the 9800 witholds the ‘Restore’ signal and full Police
action will be taken. After either situation, the system will require to be reset
by the engineer, or by following the ‘Remote Reset’ procedure (if
programmed).
IMPORTANT NOTE
If your system is fitted with a remote signalling device and a full alarm
condition has been caused by accidental deviation from the entry route
and you have been able to unset the system during the second stage timer
(if applicable), it is important that you immediately contact your alarm
company central station in order that action can be cancelled.
12