Scantool WSP 100T, Руководство пользователя

Страница: 5 / 33

4
1. GENERAL INFORMATION AND SPECIFICATIONS
The Hydraulic Workshop Press is designed for:
•
Bending and straightening of beams, profiles, pivots, shaft etc.
•
(dis)assembly of bearings, bushings or pivots
•
stamping, punching, forming of wide range of materials
Fig.1 Typical use of press
This machine can be used in repair shops, work shops, etc. To enable more options, the
machine can be equipped with special tools as V-block or an inner table.
Warning: proper use of the machine in necessary at all times, to prevent
damages to the machine and injury of the operator. Therefore operation
of the press is only allowed by persons who have read, understand and
follow this manual.
1.1 Tehnical data
Fig.2 Dimensions overview