Scantool WSP 100T, Руководство пользователя

Страница: 12 / 33

11
•
Tighten all bolts with a torque of 50Nm
•
Fix the hydraulic hoses to the head of the press, using 2x hose clamps, cover, M8
bolt and ring.
•
Make sure there are no curves in the hoses between the clamps and connections
of the hydraulic unit (see fig.11-right picture)
Fig.10 Fixing hose clamps
3.6 Oil tank filling
The press is delivered without oil. Before starting up, the tank needs to be filled with HL46
oil or similar hydraulic oil. Therefore
•
the piston needs to be in the upper position
•
remove the filler plug on top of the hydraulic
tank
•
fill the tank with an appropriate quantity of
oil. The minimum oil quantity per press type
is mentioned in the table besides
•
Replace the filler plug
Note: never run the motor with a low oil level. This will damage the
hydraulic unit and it can give a de-function of the press.
Press
type Minimum oil quantity
(ltr)
30T 15
60T 20
100T 25
160T 35
200T 42