Scantool 320 GSHE, Руководство пользователя

Страница: 13 / 32

12
101,102,110,122,17
2
234 71
1751,182,220,51
0
234 71
625,706,715,934 234 71
630 229 70
811 214 65
Carbon
Steel
1117 339 103
1137 289 88
1141,1144 279 85
1141 HI
STRESS
279 85
1030 329 100
Carbon
Steel
1008,1015,1020,10
25
319 97
1035 309 94
1018,1021,1022 299 91
1026,1513 299 91
A36(SHAPES),104
0
269 82
1042,1541 249 76
1044,1045 219 67
1060 199 61
1095 184 56
Ni-Cr-Mo
Alloy Steel
8615,8620,8622 239 73
4340,E4340,8630
219 67
8640 199 61
E9310 174 53
Tool Steel A-6 199 61
A-2 179 55
A-10 159 49
D-2 90 27
H-11,H-12,H-13 189 58
Stainless
Steel
420 189 58
430 149 46
410,502 140 43
414 115 35
431 95 29
440C 80 24
304,324 120 36
304L 115 35
347 110 33
316,316L 100 30
416 189 58
TELLTALE CHIPS
Chips are the best indicators of correct feed force. Monitor chip information and
adjust feed accordingly.
Thin or powdered chips – increase feed rate or reduce band speed.
Burned heavy chips – reduce feed rate and/or band speed.
Curly silvery and warm chips – optimum feed rate and band speed.
9.USE OF MAIN MACHINE PARTS
9-1.POWER SYSTEMS AND CONTROL PANEL
Before connecting your machine to an electrical power system, be sure the motor shaft is running in the
correct direction.
Refer to the electrical wiring diagram supplied with your machine for instructions
on how to connect saw to power source. Power must be cut off when wheel cover is opened or during
repairing.
Please check the moving direction of the blade. If the blade is moving in the wrong direction, please re-
connect the wire.