Scantech ORION O-3050, Руководство пользователя

Страница: 27 / 41

Installing the ORION O-3050 19
2.4 INSTALLING THE SCANNER WITH THE COUNTER STAND
To install the scanner with the light stand, follow the instructions below:
1.
Fix the stand to the desired place using screws and the screw holes on the
stand.
2.
Get all cables connected.
3.
Position the scanner into the stand as indicated in the figure below.
4.
Turn on the host system.
Once the scanner is installed, you can start scanning bar code labels. If you
want to change the default settings of the scanner, proceed to the Configuration
Guide which came with the scanner.
2.5 INSTALLING THE SCANNER USING THE FLEXIBLE
SCANNER STAND
To install the scanner on the flexible scanner stand, lead the cables through the
stand to be connected to the scanner. Furthermore the stand should be
fastened to the counter top. Finally, the scanner should be fastened to the
stand.
You are advised to precisely follow the next steps:
1.
Remove the cover disk (center cap) from the stand and remove the bottom
plate from the stand.