background image

iReal 2s Handheld Color 3D Scanner User Manual                                                                 

 

II 

 

Basic label 

This manual will use the following labels to describe different significance, so please 

red carefully and make sure understand all of labels.   

 

Fail  to  obey  the  announcement  will  cause 

dangerous  situation

  or 

injuries and deaths 

 

Fail  to  obey  the  announcement  may  cause 

dangerous  situation

  or 

injuries and deaths 

 

Fail to obey the announcement may cause minor injury 

 

Fail to obey the announcement may damage product or surrounding   

 

Safety Announcement 

 

During scanning process, must obey announcement and use product 

correctly 

Please use it correctly 

To avoid malfunction of the KSCAN series and to ensure proper use, please 

observe the following precautions. 

Normal Announcement 

 

 

Before starting work, please confirm the function and performance 
of this product, and the equipment can operate normally. 

 

If the product malfunction, please turn off the power immediately 
for preventing other damage. 

 

Please don’t change temperature suddenly during product use, 
otherwise condensation will cause equipment failure.   

 

 

For out of the working range, and modified products, the company 
does not guarantee its function and performance. 

 

When this product is combined with other equipment, it may not be 
able to satisfy the function and performance depending on the 

Attention 

Danger 

Caution 

Warning 

Caution 

Attention 

Notice 

Содержание iReal 2S


















































Отзывы: