iReal 2s Handheld Color 3D Scanner User Manual
14
(1)Click “Calibration” on the main page to start the calibration operation
demonstration video. After learning, click “Calibration” to control the angle of the
scanner, adjust the distance between the scanner and the calibration board, and ensure
the gray shaded part and red shade on the calibration board. Partially overlap; move the
scanner according to the calibration interface prompts, so that the gray and blue model
scanners basically overlap, and complete the calibration steps (Figure 4-1).
Figure4- 1 Calibration step
(2)Follow the calibration software prompts to complete the five calibration steps
from position one to position five step by step. Final calibration results (Figure 4- 2).
Figure4- 2 Calibration Results
