I100 BT
24
Resume When Power On
This is set to ON or OFF of “Resume When Power On”.
Software update
Upgrade information will pop up on the display when there is
upgrade available on the server.
Reset to default
You can do this factory reset to empty all of the settings and it
comes back to default settings.
**
Please note all the Station presets, Settings and
configuration will be lost after you have performed the
“Factory Reset”.
TROUBLE SHOOTING
1. If you have trouble connecting the radio to your wireless
network, these steps may help to resolve the problem:
-
Confirm that a Wi-Fi or Ethernet Wired connected PC can
access the internet (i.e. can browse the web) using the same
network.
-
Check that a DHCP server is available, or that you have
configured a static IP address on the radio.
-
Check that you firewall is not blocking any outgoing ports.
- Some access points may be set so that only equipment with
registered MAC addresses can connect to them. This is one
possible cause of the Internet Radio being unable to connect
to the Wi-Fi network, and the Internet Radio display will show
Bad ESSID or key. To overcome this problem you will need
to add the Internet Radio’s MAC address to the list of allowed
equipment in your access point. The Internet Radio’s MAC
address can be found using the menu <Information Center
->System Information -> Wireless Info -> MAC address>. You
