ScanSoft PDF CONVERTER STANDARD 3 - GUIDE, Онлайн руководство пользователя

Страница: 47 / 52

47
Troubleshooting
PDF couldn't be opened
The PDF file may be damaged, or created with very untypical settings using third-
party software.
You cannot open a password protected PDF file
The PDF file may be protected by open and permissions passwords and by
limitations on how the PDF may be used. See
Protected PDF Files .
Converted file has fewer pages than the original
Check the Image-only Pages options in the Document Options panel. If Skip is
selected, the PDF Converter will leave out the image-only pages from the output
file.
Converted file has some image-only pages
Check the Image-only Pages options in the Document Options panel. If the Add
to Document as Image option is selected, all the pages without a text layer in
the PDF file will be put as images in the converted file. Remember, in the
Preview panel you can check whether the pages of a PDF file have a text layer or
are image-only pages.
shows that a text layer was detected for a page.
shows the image-only pages.
Converted file has incorrect character display
The PDF file may use non-standard character encoding for some or all of its text.
Enable the
Recognize non-standard encoded pages option in the Document
Options panel or in the Spreadsheet Options panel. Check also the language
selection for recognizing non-standard encoded pages in the OCR Settings
dialog box. To do this click the Settings button in the
Document Options or
Spreadsheet Options panel.