Scanreco RC400, Инструкция по эксплуатации

Страница: 34 / 40

Document type Document number Rev Page
Manual 66024
C 33 of 37
6.3 Indications on the Central Unit
Status and error code indications can be read from the Central Units 2 front side
LED’s (LED DV and LED STATUS) and thru lid window monitoring internal double 7-
segment LED display, locations are displayed on below figure. (see figure 6.2).
Figure 6.2 Indicators on the Central Unit.
6.3.1 Operational status indications
Operational status indications can be read from the LED STATUS and LED DV.
A functional system should indicate the following on LED ON:
LED STATUS lit red; Central Unit is in standby mode
LED STATUS lit green; Central Unit is in operational standby mode, or in
operational mode
LED STATUS flashing red; Error code sequence (Check double 7-segment LED
display for further information.
The LED DV is used to indicate current status for the Dump Valve output
LED DV lit red; Indicates that the DV-output is active
STATUS LED`s
7-segment
LED display
33/37