Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
10.7.3. Protocol: Alcatel TCP/IP [port 2533]
The Alcatel protocol connects to the PBX and receives CDR data on TCP/IP port 2533.
You should program the ip.buffer in the following way:
Source type = TCP
Connect = “ipbuffer to Device (active/client)”
(enforced)
Address =
IP address of the Alcatel PBX
TCP Port = 2533
(enforced)
It is vital that only one client connects to the Alcatel at a time! The PBX does
not enforce this, so if more clients try to connect they will succeed – but CDR
records will not be delivered to all clients (and the one that receives most of
the records may not get 100%). Scannex have an AppNote that details ways to
check the number of connections to the Alcatel.
Page 75
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
10.7.3. Protocol: Alcatel TCP/IP [port 2533]
The Alcatel protocol connects to the PBX and receives CDR data on TCP/IP port 2533.
You should program the ip.buffer in the following way:
Source type = TCP
Connect = “ipbuffer to Device (active/client)”
(enforced)
Address =
IP address of the Alcatel PBX
TCP Port = 2533
(enforced)
It is vital that only one client connects to the Alcatel at a time! The PBX does
not enforce this, so if more clients try to connect they will succeed – but CDR
records will not be delivered to all clients (and the one that receives most of
the records may not get 100%). Scannex have an AppNote that details ways to
check the number of connections to the Alcatel.
Page 75
