Scannex ip.buffer, Руководство пользователя

Страница: 42 / 152

Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
Other Alerts
If the Log area becomes full, the alert tag “
Log
” with description “
Log full
” will be
sent.
If the ip.buffer boots up running on a power supply that has too low a voltage, the alert
“
LowVolts
” will be sent.
Other alerts are listed in Section 8.2.8
Schedule for Quiet Alerts
The individual channels specify the timeout for the quiet alerts, but the schedule decides
whether the alert is actually sent.
Days
Check which days to send quiet alerts.
[Mon,Tue,Wed,Thu,Fri,Sat,Sun]
Between The start time for the schedule 28 [0000]
…and The end time for the schedule [2359]
Source Quiet Alerts
 These are duplicate entries as found in the individual channels
Channel #
The number of minutes of quiet before sending an alert.
A value of “
0
” means disabled. [0]
Source Connect/Disconnect alerts
 These are duplicate entries as found in the individual channels
Channel #
“
Ignore
” – don’t send an alert on connect/disconnect.
“
Notify
” – send an alert when connected or disconnected.
[Ignore]
If the alert cannot be sent, then new events will overwrite the pending ones.
28 You must enter the minutes as well as the hours. e.g. 10am should be entered as 1000; 9am can
be written as 0900 or 900
Page 38
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
Other Alerts
If the Log area becomes full, the alert tag “
Log
” with description “
Log full
” will be
sent.
If the ip.buffer boots up running on a power supply that has too low a voltage, the alert
“
LowVolts
” will be sent.
Other alerts are listed in Section 8.2.8
Schedule for Quiet Alerts
The individual channels specify the timeout for the quiet alerts, but the schedule decides
whether the alert is actually sent.
Days
Check which days to send quiet alerts.
[Mon,Tue,Wed,Thu,Fri,Sat,Sun]
Between The start time for the schedule 28 [0000]
…and The end time for the schedule [2359]
Source Quiet Alerts
 These are duplicate entries as found in the individual channels
Channel #
The number of minutes of quiet before sending an alert.
A value of “
0
” means disabled. [0]
Source Connect/Disconnect alerts
 These are duplicate entries as found in the individual channels
Channel #
“
Ignore
” – don’t send an alert on connect/disconnect.
“
Notify
” – send an alert when connected or disconnected.
[Ignore]
If the alert cannot be sent, then new events will overwrite the pending ones.
28 You must enter the minutes as well as the hours. e.g. 10am should be entered as 1000; 9am can
be written as 0900 or 900
Page 38