SCANMASKIN 28 WS, Руководство пользователя

Страница: 90 / 410

1 Left/Right Selects rotation direction
grinding motor
596020
2 Hour Meter Total running hours 570028
3 Speed Changing the grinding
motor speed
596009
4 Water Off/On Engage the water flow 596020
5 EMERGENCY STOP Emergency Stop (2)596021
6 Start/Stop Starts and Stops the grind-
ing motor
596021
7 Main key switch Main key switch
8 Joystick Manual Joystick for wheel
system
572064
9 DSP System HMI, Human, Machine In -
terface
572012
Table 41 Description of the control panels.
4.4
Start up
See ”4.1Precautions” before starting the machine.
How to start the machine

Make sure that the machine has the optimal Scanmaskin approved grinding tools for the
surface.

Make sure that the power plug and hoses for dust collector (if used) are connected to the
machine.

Turn on the dust collector if used.

Make sure that the “EMERGENCY STOP” button (5) is in its upper position. If not, release
it by turning it clock wise until it rises and press the “STOP” (6) red button once to reset.

Adjust the motor speed (3) to the lower first half.

For RC models please see the chapter “4.11 Navigate the “HMI” on a RC model” for start
process.

Make sure to have a firm grip on the handle.

Press “START” (6) the green button.

Adjust the speed (3) to get desirable cut.
4.5
Stop
How to stop the machine

Press the “STOP” (6) button.

Wait for the machine to come to a complete stop before letting go of the handle.

Turn off the dust collector if used.
90
www.scanmaskin.com