Control panel
1 On/Off
Produet is switched on or off.
2 Start/Pause
Press the button to start or pause the drying cycle.
3 Working state LED
4 Function LED
3h, 6h, 9h, 12h, Child lock, Filter, Full and Anti-Crease
5 Specialty function
These buttons are used for setting additional functions ( Delay, Anti-
Crease, Childlock ).
6 programmes
Different Dryer cycle can be selected according to the user's needs to
make the clothes have more effective drying result
.
OPERATIONS
Programme selector
Press the ”On/Off” button. When the LED display screen brightens up,
rotate the programme knob to select the desired programme.
Select the ”Delay” or ”Anti-Crease” functions for additional option.
Press the ”Start/Pause” key.
Programme start
The drum will keep rotating after the programme starts, the state light
in the display area will flash in sequence, the remaining time displayed
will change automatically.
Programme end
The drum will stop running after the programme ends, the working state
LED will stay light and buzzer will ring. The "Filter" and "Full" LED will
remind user to clean the filters and container. The dryer will start ”Anti-
crease” function if user doesn't remove the load in time. Please press
”On/Off” key to cut off power and pull the plug out.
Deal with the problems according to "Malfunction display and solu-
tions", if there is a unexpected stop during the drying procedure and the
dryer show information.
Other Functions
”Delay” function
This function is used for delaying clothes drying time within 24 hours.
The delay time means the programme will start after x hours. When the
delay programme starts, the time starts to decrease on the display and
the delay icon blinks.
Steps in details:
1 Load your laundry and make sure the machine door is closed.
2 Press the ”On/Off” button, then to turn the programme selector
knob and select a desired programme. You can select the ”Anti-
Crease” functions according to your need.
4 To press the ”Delay” key.
5 Continue to press the ”Delay” to select the delay time.
6 After the ”Start/Pause” key is pushed, the Dryer is at the run con-
dition. The drying procedure will be automatically performed when
the delay time is over.
7 lf you push the ”Start/Pause” button again, the delay function will
be paused. lf you want to cancel the "Delay" function, please press
the ”On/Off” button.
”Anti-Crease” function
At the end of the drying cycle, the anti-crease phase time is 30 minutes
”default” or 120 minutes ”selected”.
This function prevents the laundry from creases. The laundry can be re-
moved during the anti-crease phase. Except ”Cool”, ”Refresh”, all the
other programmes have this function.
“Child Lock” function
1 This machine incorporates a special child safety lock, which can pre-
vent children from carelessly pressing keys or making the faulty op-
eration.
2 When the dryer is at the operation state, press the ”Anti-Crease”
and ”Delay” buttons at the same time for over 3 seconds to start
child lock function. When child lock function is set, the display will
show Child lock icon and no key can effect to the dryer except
”On/Off” button. Under the start state of the child lock, the ”Anti-
Crease” and ”Delay” buttons shall be pressed at the same time for
over 3 seconds to release the “child lock” function.
Product description
A – Power cord
B - Top board
C - Container
D - Drum
E - Filter door
F - Control panel
G - Door
H - Air inlet
I - Filter base
J - Maintenance cover
Accessories
The following parts are optional for specific models.
• Hose holder
• Condenser drain hose
If your dryer has following parts, please install them
following the instruction below.
