Scandomestic SKF 500, Руководство пользователя

Страница: 15 / 19

15
• When the refrigerator stays in the packing box, plastic feet
are in tightened state. After carrying it out from the packing
box for placement, please make sure to adjust two front
plastic feet until the height
is suitable; just adjust two
plastic feet with a wrench or
directly by hand.
• Plastic feet and rear rollers
must touch the ground to
prevent the refrigerator from
movement, vibration or noise.
When moving the refrigerator,
adjust plastic feet counter-
clockwise to keep them off
the ground, and then push
the refrigerator gently to move it.
Operation
Before Using
• Remove all packages, including the foam backing at the
bottom of refrigerator and the tapes fixing accessories in the
box.
• Place the refrigerator to a proper position, and adjust the
feet to level.
It is better to clean the refrigerator before use.
• Remove the film: There is a layer of transparent film on
the panel of our product, which can protect products from
being scratched in the process of production and transporta-
tion, and you can choose to reserve or remove the film as
needed.
• Place the refrigerator and adjust to level, clean it, let the
refrigerator stand for above 2 ~ 6 hours, and then power on
to ensure that the refrigerator can operate normally.
Starting and function setting
Connect the power cord, and turn on the power switch. Upon
startup for the first time, the screen will display respective set
temperature values (the temperature of refrigerating chamber is
set as 5°C, temperature of freezing chamber -18°C)
Function setting of LED display
The default mode is energy saving upon startup: The screen dis-
plays for 30 s and then goes off. This mode to save energy and
prolong the service life of LED lights.
Control panel
Super freeze
• This product has the super freeze function in order to freeze
fresh foods quickly and effectively.
• Touch “Super freeze” button, icon is lighted, and super
freeze mode starts to operate; it can make fresh foods
frozen quickly and reach freezing temperature.
• If a number of foods are frozen once, turn on super freeze
function in advance to make the temperature of freezing
chamber drop to low point, and then put foods into the
freezing chamber.
• The default super freeze time is 180 min. To quit in advance,
touch “Super freeze” button, and icon goes out, which
represents that super freeze function has been disabled.
Freezer chamber temperature setting
• First connection, the temperature of freezing chamber was
set at-18°C.
• Touch “Freezer” button, and the temperature will cycle in
the order of (-18°C> -19°C> -20°C> -21°C> -22°C> -23°C>
-15°C> -16°C> -17°C) The last indicated is saved and the ap-
pliance starts to work until it reaches the set temperature.
• CAUTION: Do not put fresh roods directly on the frozen
foods.
Refrigerator-chamber temperature setting
• First connection, the temperature of refrigerator chamber
was set at 5°C.
• Touch “Fridge” button, and the temperature will cycle in the
order of (5°C>4°C>3°C>2°C>0°C>6°C).The last indicated is
saved and the appliance starts to work until it reaches the
set temperature.
Lock/unlock button
This product has button lock function.
• Touch
“Lock/Unlock(3s)” button, and icon comes on, which
represents entry into button lock status.
• When button lock function is operating, other buttons on the
control panel will be locked and can not be operated; when
touching other buttons, icon flashes and chime sounds.
• In lock status, touch
“Lock/Unlock(3s)” button for 3 s, icon
goes out, which represents lock status is quitted and other
buttons can be operated.
Special funtion - Rapid cooling
If a number of foods are refrigerated once, which will raise the
temperature of refrigerator chamber quickly, the system will en-
ter rapid cooling program. It can make fresh foods reach refrig-
erating temperature quickly, to better retain the freshness and
nutrition of foods. The rapid cooling mode has an effect on the
refrigerating chamber only, and the freezing chamber is operat-
ing according to the original set temperature. In rapid cooling
mode, the set temperatures of freezing chamber and refrigerat-
ing chamber are adjustable. After rapid cooling mode is quitted,
the refrigerating chamber and freezing chamber are operating
according to the original set temperatures.