Page 13
4. Installation
Installing the Cooktop
• Prepare an opening in the benchtop of a kitchen cabinet, as per the installation drawing.
•
Ensure a minimum clearance of 130 mm below the gas cooktop.
• Connect the cooktop to a gas and electrical system in accordance with the instructions supplied.
• Loosely attach fixing brackets to the bottom of the cooktop.
• Use the four fixing brackets (3) for 38mm thick benchtops. Fit the cooktop into the benchtop opening as
shown on figure 2 and 3. To properly secure the cooktop on a 28mm thick benchtop, use four 15 x 15 x 50mm
wooden blocks in addition to fixing brackets (3). Fit the cooktop into the benchtop opening as shown on
figure 4.
• Check the adhesive seal is properly applied to the cooktop‘s flange.
• Remove dust from the worktop, insert cooktop into the opening and press in firmly.
• Position fixing brackets perpendicular to the cooktop’s edge and tighten firmly.
• Once you install the cooktop in the benchtop, check if it operates, especially the flame failure cut-off and
igniter.
3
4
3
2
1
3
4
1
5
3
51
15
2
Rangehood
1. Benchtop
2. Screw
3. Bracket
4. Cooktop
3
4
3
2
1
3
4
1
5
3
51
15
2
Rangehood
52
520
590
Fig 1 Cooktop Dimensions
Fig 2
