SCANDINOVA UFA 184, Руководство по эксплуатации, Страница: 13 / 16

GB
13
Switch the appliance off when cleaning the
inside of the cabinet.
The cabinet is best cleaned with a weak
soap solution (max. 85ºC) Never use
cleaning agents that might cause scratches
or leave an odour which may contaminate
the food.
Clean the sealing strip around the door
regularly to prevent discolouratin and
prolong its life. Clean with clear water only.
Rubit it thoroughly dry.
Remove dust and threads from the
compressor compartment with a vacuum
cleaner. The front kick plate can be
removed to enable cleaning under the
appliance.
The cabinet is to remain unused for
a time:
After the refrigerator has been
defrosted and cleaned, leave the door
slightly ajor. This will prevent bad smells.
Save energy
- Cool hot food and drink before placing
them in the refrigerator
- Place frozen items in the refrigerator to
defrost.
- Keep the door closed as much as
possible.
- Thaw frozen food in the fridge
- Ensure there are no obstructions
preventing the door from closing properly.
Cleaning
Replacing the tube
Switch the appliance off by pressing the
on/off switch and disconnect the power by
pulling the plug out of the sucket. Remove
the lamp cover using a small fl at-headed
screw. Replace the PL tube (11 W). Refi t
the lamp cover, reconnect the power supply
and start the appliance by ressing the on/off
switch.
Unfamiliar sounds
Can be caused by tubes in the appliance
contacting each other or the outer cladding.
Check to make sure the refrigerator is
standing level.
Liquid noice
Caused by circulating refrigerant. This is
quite normal, even when the compressor is
not running.
Door sticking:
Opening and closing the door creates
underpressure in the cabinet. If you need to
open and close the door repeatedly within
a short period, lay something between the
door sealing strip and cabinet front edge to
create an air gab.
Useful hints
fi g. 14