16
the introduction of CFC free gases. This is not a fault and will not
affect the performance of your Fridge/Freezer.
HUMMING, PURRING OR PULSATING
This is the compressor motor working, as it pumps the refriger-
ant around the system.
Servicing
This product should be serviced by an authorized engineer and
only genuine spare parts should be used.
Under no circumstances should you attempt to repair the appli-
ance yourself.
Repairs carried out by inexperienced persons may cause injury or
serious malfunctioning. Contact the local store where your pur-
chase was made.
When the appliance is not in use for long periods, disconnect
from the electricity supply, empty all foods and clean the appli-
ance, leaving the door ajar to prevent unpleasant smells.
Lamp Replacement
LED light is used in this appliance, which with low energy con-
sumption & long life. If anything abnormal, please contact after-
sale service for help.
Reversing the Door Swing
Disassemble the refrigerator/freezer door
1. A: Use a tool to remove the screw off the hinge cover, and
then remove the latter. Insert the communication line to the
hole on the cabinet top.
B: Use a tool to remove the 4 screws off the upper hinge cover
and then remove the latter.
Pry up the door bush and small end cap cover on the door.
C: Insert the door bush and door communication line into the
hole on the door and then put on the small end cap cover.
D: Use a tool to remove the 2 screws as shows in the below fig-
ure to remove the hole cover on the cabinet top and get the cab-
inet communication line out of the hole.
Pry up the small end cap cover on the door and get out the door
bush and door communication line.
E: Insert the door bush into the round hole on the door and then
put on the small end cap cover.
F: Move the refrigerator door upward over 50mm to remove the
door.
