6
SC-8100
–
050063-000 Rev.05
Installation
WARNING!
Risk of electric shock!
Follow the
“Safety Precautions” on page 2
.
Caution!
The machine must be protected by a fuse or circuit breaker in the electrical
circuit.
The machine must be installed by an authorised SUZOHAPP
representative.
Please also note the following when installing the machine:
• Operating temperature
15–35 °C
• Operating humidity
20–90% R.H.
(non-condensing)
Do not place the machine close to any radiators. Make sure there is some
free space around the machine to allow the air to circulate.
Place the machine in a clean environment and on a stable place.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
If the plug on the supply lead to the machine has a fuse, make sure it has
the correct rating in amps.
Although this machine has been tested and complies with the national and
international standards/regulations, it is recommended that no equipment
which generates a high level of electromagnetic interference (EMI) or
vibration is placed close to the machine.
Installing and Removing Note Guides
Install and remove the note guides according to the pictures below.
Rear view
Press forward to release the guide
Machine Label
The label below is an example of the information available on the
machine.
100-240 VAC
0.350-0.175 A
60/50 HZ
M/c No.
Serial No.
Assembled 2014 in China
Fuse 5 A
MALMÖ-SWEDEN
RoHS
SD Card
SC 8100
Ext. Disp
PC
COM1
8
9
10
11
1
2
3
4
5
6
7
12
13
14
15
16
1 Machine type
2 Machine No.
3 Serial No.
4 WEEE-symbol*
5 CE-symbol
6 FC-symbol
7 SD Card
8 RoHS
9 Ext. Disp
10 PC
11 COM1
12 Year and place of
manufacture
13 Fuse
14 Frequency
15 Current consumption
16 Supply voltage
* See
“Environmental Compliance” on page 1
.
