16
Quick Start Guide SCAIME:
NUSG-eNodTouch-ML-FE-196775-D.docx
Entering Offline mode when Operating
At Power ON
Touch the upper right corner or upper left corner (within 40 pixels of the edges) of the panel for at least 3 seconds soon after the
startup screen is displayed.
When Operating
Touch the upper right then bottom left corners, or the upper left and bottom right corners of the panel (within a 40-pixel area)
within 0.5 seconds.
When the system menu is displayed, touch the [Offline] button
For more information and details about the menus, please refer to the user manual.
Important:
You may need to add a terminating
resistor (120 Ohm) if the distance
between eNod4Touch and eNod4 is
important.
If distance is short (<1m), do not add
resistor.
0V
Ta/Ra
Tb/Rb
Important:
GND (SG) must not be connected to ground Shield.
