14
Quick Start Guide SCAIME:
NUSG-eNodTouch-ML-FE-196775-D.docx
5
Insert and push the rear module until it locks into place.
IMPORTANT
: Install the rear module in the orientation shown in the illustration.
If either unit is installed incorrectly, the connector may be damaged.
6
To remove the rear module, push the yellow button to unlock it, then pull the rear module out
following the illustration:
Electrical powering
•
Supplying a power voltage other than that specified will damage the power source and the unit.
•
When the FG terminal is connected, be sure the wire is grounded.
