Scaime eNod3-C, Инструкция пользователя

Страница: 4 / 22

e Nod3- C
Digital Transmitter
e Nod3- C :
User’s instructions
NU-eNod3C-E-0911_165702-I
4/22
1 GENERAL PRESENTATION:
e Nod3-C
provides an economic high performance solution to transform any strain gauge sensor
into an intelligent digital system.
e Nod3- C
includes three advanced operating modes for control of
static and dynamic processes:
-
Measurement transmitter
.
-
Checkweigher.
- Peak control.
e Nod3- C
is provided with RS485/422, RS232 and CANbus outputs supporting the
ModBus-RTU
,
SCMBus
and
CANopen®
protocols. Each module is provided with 2 logical inputs and 2 logical
outputs, authorizing synchronization of functions with automation and alarm management.
SCAIME
provides the
e Nod View
software to facilitate installation of
e Nod3- C
to set parameters
and calibrate the measurement system, for acquisition of measurements and simulation of digital
filters.
1.1 Dimensions:
With waterproof housing version a connecting cable with a shield grounded on both sides should
be used to connect peripheral devices and eNod3.
Cable gland is provided with an inside contact spring for an easy and safe EMC connection of
shield cable and housing.
Single board card
Waterproof
housing version
DIN rail version