manualshive.com logo in svg

Scag Power Equipment V-Ride II, Руководство оператора

Поделиться
Скачать
Scag Power Equipment V-Ride II Скачать руководство пользователя страница 22

18

R

Section 4

4.14  ADJUSTING CUTTING HEIGHT

The mower deck can be adjusted from a height of 1-1/2 
inch to 4-1/2 inches at 1/4-inch intervals. To adjust the 
cutting height:  

 WARNING

DO NOT adjust the cutting height with the mower 
blades rotating. Disengage the power to the 
cutter blades, put the steering control levers in 
the neutral position, apply the parking brake and 
then adjust cutting height.

1.  Disengage the power to the cutter blades. 

2.  Pull on the cutter deck lift lever lever all the way 

backward until it locks in place. See Figure 4-6.

3.  Insert the lanyard pin into the cutting height index 

at the desired cutting height.  Pull backward on the 
cutter deck lift lever, push and hold the lock button 
See Figure 4-6. Slowly release the cutter deck lift 
lever. A deck height decal is located on the cutting 
height index as an aid in adjusting the deck to the 
desired height.

CUTTER DECK

LIFT LEVER

LANYARD PIN

Figure 4-6. Adjusting Cutting Height

Содержание V-Ride II

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды