background image

6

Section 2

R

22.  Keep hands and feet away from all other moving 

parts. Contact can injure.

23.  Use care when approaching blind corners, shrubs, 

trees, or other objects that may obscure vision.

24.  NEVER leave the machine running unattended.

2.5 MAINTENANCE CONSIDERATIONS & 
STORAGE

1.  Check impeller on a regular basis for bent, worn, 

or cracked blades. Only replace impellers. Do not 
straighten or weld the impeller fan.

2.  Never make adjustments to the machine with the 

engine running unless specifically instructed to do 
so. If the engine is running, keep hands, feet, and 
clothing away from moving parts.

3.  Disconnect spark plug wire(s) to prevent 

accidental starting of the engine when servicing 
or adjusting the machine. Wait for all movement to 
stop before adjusting, cleaning, or repairing.

4.  Keep all nuts, bolts, and screws tight, especially 

the impeller bolt, to ensure the machine is in safe 
working condition. 

5.  Do not change the engine governor settings or 

overspeed the engine. See the engine operator's 
manual for information on engine settings.

6.  To reduce fire hazard, keep the muffler and engine 

free of grass, leaves, excessive grease, oil, and 
dirt.

7.  Store the machine on level ground.

8.  NEVER allow untrained personnel to service the 

machine.

9.  Keep all parts in good working condition. Replace 

all worn or damaged decals.

10.  Use jack stands to support components when 

required.

11.  Let the engine cool before storing.

12.  Keep the unit locked in a secure location and 

disconnect the battery to prevent unauthorized 
personnel, especially children, from playing and/or 
tampering with the unit.

13.  DO NOT store the machine near an open flame.

14.  Always follow the engine manufacturer's 

recommendation for storing and returning to 
service.

15.  Shut off fuel while storing or transporting.

2.6 USING A SPARK ARRESTOR

The engine on this machine may not be equipped with 
a spark arrestor muffler. It is in violation of California 
Public Resource Code Section 4442 to use or operate 
this engine on or near any forest covered, brush covered, 
or grass covered land unless the exhaust system is 
equipped with a spark arrestor meeting any applicable 
local or state laws. Other states or federal areas may have 
similar laws. Check with your state or local authorities for 
regulations pertaining to these requirements.

2.7 SPARK IGNITION SYSTEM

This  spark  ignition  system  complies  with  Canadian       
ICES-002.

Содержание TLS20W-29BV






























Отзывы:

Похожие инструкции для TLS20W-29BV