Scag Power Equipment SMTC-40 Скачать руководство пользователя

Страница: 2 / 66

FAILURE TO FOLLOW SAFE OPERATING PRACTICES

MAY RESULT IN SERIOUS INJURY.

* Keep all shields in place, especially the grass discharge chute.

* Before performing any maintenance or service, stop the machine and

remove the spark plug wire and ignition key.

* If a mechanism becomes clogged, stop the engine before cleaning.

* Keep hands, feet and clothing away from power-driven parts.

* Read this manual completely as well as other manuals that came

with your mower.

* Keep others off the tractor (only one person at a time)

REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR!

Hazard control and accident prevention are dependent upon the awareness,
concern, prudence, and proper training of the personnel involved in the
operation, transport, maintenance, and storage of the equipment.

This manual covers the operating instructions

and illustrated parts list for:

STC40-17KA

with a serial number of 6570001 to 6579999

STC48A-19KA with a serial number of 6580001 to 6589999

STC48A-20CV with a serial number of 6590001 to 6599999

STC48A-21KA with a serial number of 6600001 to 6609999

STC52A-21KA with a serial number of 6610001 to 6619999

STC52A-23KA with a serial number of 6620001 to 6629999

STC52A-23LV with a serial number of 6630001 to 6639999

SMTC-40

with a serial number of 6640001 to 6649999

SMTC-48A

with a serial number of 6650001 to 6659999

SMTC-52A

with a serial number of 6660001 to 6669999

Always use the entire serial number listed on the serial number

tag when referring to this product.

WARNING:

Содержание SMTC-40



































































Результаты поиска

Содержание SMTC-40

Отзывы:

Похожие инструкции для SMTC-40

Бренды по названию

Популярные бренды

Scag Power Equipment SMTC-40, Руководство оператора

Результаты поиска

Содержание SMTC-40

Отзывы:

Похожие инструкции для SMTC-40

Бренды по названию

Популярные бренды