Scag Power Equipment 52B-22CH, Руководство оператора

Страница: 41 / 65

37
Section 8
Ref. Part
No.
No. Description
CUTTER DECK CONTROLS, 52" & 61" DECKS
1 481549 Spring, Deck Lift
2 481763 Link, Deck Lift
3 481765 Rod End, Female - 1/2-20 RH
4 481766 Rod End, Female - 1/2-20 LH
5 04020-27 Nut, Jam 1/2-20 RH
6 04020-28 Nut, Jam 1/2-20 LH
7 422439 Flatwasher, Spring Stop
8 481560 Slide Weldment, Height Adjustment
9 43391 Spacer, Decklift Pedal
10 43487 Pin, Decklift
11 43472 Swivel Joint, LH
12 43473 Swivel Joint, RH
13 45904 Bellcrank Weldment, LH Rear
14 45905 Bellcrank Weldment, RH Rear
15 45907 Bellcrank Weldment, RH Front
16 422381 Guide, Short
17 422380 Guide, Long
18 422346 Lockplate, Decklift
19 46975 Deck Latch (Includes items 20& 21)
20 48100-14 Bushing, .502 ID.
21 481428 Grip, Deck Latch
22 45945 Footplate Weldment, Decklift
23 422451 Footplate, Height Adjustment
24 45906 Bellcrank Weldment, LH Front
25 04012-09 Set Screw, 5/16-18 x 1/2" Sq. Head
26 04063-23 Key, 1/4 x 1/4 x 3-1/4"
27 04041-14 Flatwasher, 1" (1.062 x 1.50 x .048)
28 48114-04 Grease Fitting
29 04001-91 Bolt, Hex Head 7/16-14 x 2-1/2"
30 04021-11 Nut, Hex Elastic Stop 7/16-14
31 04004-33 Stud, 5/8-11 x 22.0"
32 04067-05 Ring Pin, 1/2 x 3.30"
33 04050-08 Ring, Retaining 1" External "E"
34 04063-01 Key, 1/4 x 1/4 x 1-1/4"
35 04003-11 Bolt, Carriage 3/8-16 x 1-1/4"
36 422403 Bracket, Cutting Height Adjustment
37 48100-08 Bushing, 1.003 ID.
38 481547 Lanyard, Deck Height Pin
39 48540 Chain
40 04001-20 Bolt, Hex Head 3/8-16 x 1-1/2"
41 04019-04 Nut, Hex Serrated Flange 3/8-16
42 04050-10 Ring, Retaining 1/2" External "E"
43 04001-74 Bolt, Hex Head 1/2-13 x 3"
44 04003-04 Bolt, Carriage 5/16-18 x 1"
45 04009-02 Bolt, Shoulder 1/2 x 3/4"
46 04019 -03 Nut, Hex Serrated Flange 5/16-18
47 04014-03 Screw, Cap 5/16-18 x 3" FHHS
48 04021-07 Nut, Hex Elastic Stop 1/2-13
49 04021-10 Nut, Hex Elastic Stop 5/16-18
50 04050-01 Ring, Retaining 5/8" External "E"
51 04040-09 Flatwasher, 5/8" (.656 x 1.312 x .095)
52 04020-09 Nut, Hex 5/8-11
53 481522 Spring, Helper (61” Cutter Deck Only)
54 04021-05 Locknut, 3/8-16 Center Lock
55 04021-09 Nut, 3/8-16 Elastic Stop
56 04041-07 Flatwasher, 3/8”
* Common hardware which should be purchased locally. All bolts Grade 5 plated, all other fasteners zinc plated.