![background image](http://html1.mh-extra.com/html/scag-power-equipment/52b-22ch/52b-22ch_operators-manual_1205785030.webp)
Section 7
27
7.4 ENGINE OIL
A. Checking Engine Crankcase Oil Level
The engine oil level should be checked after every 8 hours
of operation or daily as instructed in the Engine
Operators Manual furnished with this mower.
Figure 7-4 Engine Fill Stick
390S0155
HYDRAULIC OIL
FILTER
390S0156
ENGINE OIL
DIPSTICK
C. Changing Hydraulic Oil Filter Element
The hydraulic oil filter should be changed after every 500
hours of operation or annually, whichever occurs first.
1. Remove the oil filter element (Figure 7-3) and
properly discard it. Fill the new filter with clean oil
and install the filter. Hand tighten only.
2. Run the engine at idle speed with the speed control
lever in neutral for five minutes.
3. Check the oil level in the hydraulic tank. It must be
3-1/4" inches from the top of the filler neck. If
necessary, add SAE 20W50 motor oil.
Figure 7-3 Hydraulic Oil Filter
B. Changing Engine Crankcase Oil
After the first 5 hours of operation, change the engine
crankcase oil and replace the oil filter. Thereafter, change
the engine crankcase oil after every 100 hours of operation
or bi-weekly, whichever occurs first. Refer to the Engine
Operators Manual furnished with this mower for
instructions.
Figure 7-5 Drain Plug Location
Figure 7-6 Engine Oil Filter Location
STT99CEC
ENGINE OIL FILTER
DRAIN
PLUG
STT99CEC
ENGINE OIL FILTER
DRAIN
PLUG
Содержание 52B-22CH
Страница 10: ...7 Section 4...
Страница 37: ...33 Section 8...
Страница 65: ...PART NO 03059 PRINTED 8 98 PRINTED IN USA 1998 SCAG POWER EQUIPMENT DIVISION OF METALCRAFT OF MAYVILLE INC...