SC2000 PZ00, Руководство пользователя

Страница: 24 / 84

24
Object Size
Drag the white bar or press
◀ ▶
to set up Object Size
from value 1 to 15 for each channel. The lower value
you set the higher sensitivity it will be. Value set up as 1,
the motion will be detected easiest.
Sensitivity
Drag the white bar or press
◀ ▶
to set up Sensitivity from
value 1 to 15 for each channel. The lower value you set
the higher sensitivity it will be
Motion Area Setup Enter to setup motion detection area
4-2.1.1 MOTION AREA SETUP
The motion detection has been divided into 16x12 grids. The default detection area is
full screen as it marked in transparent for local DVR and purple for remote access.
Areas deselected for motion detection are marked in red for both local and remote sit
e.
Item Description
Mask Mouse Selection Switch between
“select” and “deselect” for cursor-dragging function
All Area Detection Select entire screen as detection area.
Mask All Area Deselect entire detection area.
Continue Continue setup
Exit & Save Save setup and leave
Exit & Discard
Cancel setup and leave
4-2.2 SENSOR SETUP