SC2000 PTA1326X, Инструкция по установке и эксплуатации

Страница: 9 / 17

6：Feature set：
1 set / call the preset position
The preset function is called by the control device settings /
infrared ball horizontal angle, vertical angle position parameters
stored in digital form to the infrared ball, you need to call these
parameters can be adjusted to the infrared ball preset position setup .
The operator can quickly and easily through the control of keyboard
and other device settings / call the preset position of the infrared
dome support 128 preset positions.
(1) Set preset position
Keyboard or DVR settings preset by control keyboard, hard disk
recorders and other control equipment to the infrared ball to move
to the appropriate location, by controlling the zoom buttons of the
keyboard, hard disk recorders and other control equipment to a
suitable angle lens multiples of the reference control bit preset
settings, and enter the appropriate preset number
For example: the use of a particular model control keyboard settings
preset
a set preset key, then move the control the rocker ball machine to
the desired position, press the zoom key to change the lens to the
desired angle.
b, enter "1" key
c, press "OK" button
(2) call the preset position
Refer to control the keyboard or DVR to call preset function call
preset, and may demand the preset number call.