SC2000 PTA1326X, Инструкция по установке и эксплуатации

Страница: 8 / 17

11100000 7 01101000 22 10100100 37 00101100 52
00010000 8 11101000 23 01100100 38 10101100 53
10010000 9 00011000 24 11100100 39 01101100 54
01010000 10 10011000 25 00010100 40 11101100 55
11010000 11 01011000 26 10010100 41 00011100 56
00110000 12 11011000 27 01010100 42 10011100 57
10110000 13 00111000 28 11010100 43 01011100 58
01110000 14 10111000 29 00110100 44 11011100 59
……………
00111100 60 10111100 61 01111100 62 11111100 63
……………
00011111 248 10011111 249 01011111 250 11011111 251
00111111 252 10111111 253 01111111 254 11111111 255
２、Baud Rate Setting
Second 8-bit DIP switch B2 4,5 for the ball set the baud rate, the
baud rate can be set 2400BPS, 4800BPS, 9600BPS, 19200BPS. Each switched
to ON to OFF value is 1, the value is 0, the baud rate with DIP switches
corresponding to Table 3。
Table 3: baud rate DIP switch correspond
DIP switch 2400 bps 4800 bps 9600 bps 19200 bps
# 4 OFF ON OFF ON
# 5 OFF OFF ON ON
Under control of the ball equipment communication baud rate DIP
switch settings in Table 3。
３、Protocol settings
The ball decoder board automatic matching agreement, without
setting; Supported protocols are PELCO_D, PELCO_P。
5