8
/
11
INSTRUCTION MANUAL JUMP STARTER SC POWER SC15
INSTRUCTION MANUAL JUMP STARTER SC POWER SC15
OPERATION OF CAR CRANKING
Step 1
Connect the Battery
Attach the red positive clamp (+) to the positive (+) battery
post, then attach the black negative clamp (-) to the car
chassis or to the negative pole of the battery.
Indication:
Jump Start can only be used when the spectrum lights up to
GREEN or YELLOW.
Step 2
Press power button for 1 second to turn the
device on.
Fully charged condition as indicated
on left is important for cranking the
car successfully.
Step 3
Cranking the car
Press JUMP START button to turn on the JUMP START
function
Step 4
Cranking up the car then turn power off
Once the car engine has started, press power button
again to turn the power off.
Remove the clips
(negative clip first)
from the
battery as soon as possible.
