39
SBS-6500 User Manual
Storage Battery Systems, LLC.
1) String List (Banks)
Each string designated in the string list is a series of cells of batteries which makes up a
complete battery system. As an example, 60 cells of flooded lead acid batteries connected
in series would be a complete battery string.
All batteries in the string should be of the same manufacturer, model and age. Mixing of
types, models and ages can lead to significant problems for both the new and old batteries.
Each string that is set-up will be referenced to an entry in the Reference DB list for alarm
parameters.
When measuring cells for a system that is not already set-up in the string list the open
string (000) can be used to record the measurements. Later, all the data in that test block
can be copied and pasted into the correct location in the data table.
Meter mode (voltage, current, temp) measurements via the
key function can be
recorded at only in the open string memory spaces.
2) Cell ( Battery )
Each battery system or string consists of a number of cells/batteries connected together in
series.
Within a string, each cell can be measured up to a maximum of 100 times over the history
of the battery.
When the unit is operated with
Auto Record is on. The cell number is automatically
advanced by one each time a reading is taken and the results are recorded in the order
they are taken in that test number memory location.
7.3.
Record Display
Press encoder switch to call the string index list.
Use up/down/ direction keys on the SBS-6500 to select the record address.
Test number on the display is equal the number of tests performed on that specific string
of cells for selected string.
Width of the chart is the test number (001 ~100) of each cell. Length of the chart is the cell
numbers (001~250).
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
