Ellipse Micro AHRS & INS
– Quick Start Guide
ELLIPSEMQSG
First use of the evaluation board – typical setup
By default, the Ellipse Micro M1 is configured in RS-422 mode and M2 in RS-232. Check that the
evaluation board is properly configured before running the sbgCenter for the first time:
1.
Plug the Ellipse Micro module on the development board
2.
To select RS-422 mode, please set SW4 and SW5 in following positions:
SW4:
SW5:
3.
To select RS-232 mode on PORT A and PORT E through RS232 DB9 plug, please set
SW4 and SW5 in following positions:
SW4:
SW5:
4.
SW1, SW2, SW3 can be set to “Disabled”.
Getting Started with the Ellipse Micro
Connecting to the Ellipse
1.
Click on the
icon. A
window will appear to list
every attached device.
2.
Click on Refresh button to
update the device list, select
your sensor.
3.
Finally press “Connect” to
start working.
4/6
