SBG Systems SplitBox, Руководство пользователя

Страница: 7 / 30

SplitBox – User Manual SPLITBOXUM.1.2
1.4. SplitBox Trimble specifications (models -T)
The SPLITBOX-STD-T and SPLITBOX-SUB-T embed a very high end, survey grade, dual antenna, Trimble
GNSS receiver that is perfectly fitted for the very demanding survey market.
It features L1/L2/L5 and L-Band signals tracking and uses GPS, GLONASS, BEIDOU and GALILEO
constellations to provide very accurate and reliable measurements even in harsh environments.
The internal L-Band demodulator supports OmniSTAR and Marinestar Precise Point Positioning (PPP)
services to delivery world wide, with no specific infrastructure, a positioning accuracy better than 10 cm.
This high performance GNSS receiver also features very accurate RTK positioning as well as a cost effective
RTK10 option featuring 10cm positioning accuracy. With a max refresh rate of 50Hz, this receiver provides
excellent accuracy and reliability in harsh GNSS environments.
Specification Remark
Channels 220
Signal tracking GPS: L1 C/A, L2E, L2C, L5
GLONASS: L1 C/A, L2 C/A, L2 P, L3 CDMA
Galileo: 1 BOC, E5A, E5B, E5AltBOC
Beidou B1, B2
SBAS, QZSS
L-Band OmniSTAR VBS, HP, XP Galileo and Beidou signals are available in
option
Horizontal position accuracy
(1 sigma) SBAS / DGPS 0.5 m / 0.25 m PPP support is available in option and
requires a valid subscription from a third
party PPP service provided.
RTK positioning mode available in option
PPP 10 cm
RTK 0.8 cm + 1 ppm
Velocity accuracy 0.7 cm/s RMS
True Heading Accuracy 0.09 °
0.05 ° 2m baseline
10m baseline Baseline should not exceed 10m
GNSS only true heading accuracy, not
enhanced by the INS.
Operating Limits Altitude: 18 000m *
Velocity: 515 m/s *
Acceleration: 11g *Due to export control
Time to First Fix Cold start < 45 s
Warm start < 30 s
Signal reacquisition L1/L2/L5 < 2.0 s
Max Output frequency 50 Hz 5Hz outputs recommended for operation
with Ekinox / Apogee.
Available Options SW-TRI-BD982-RTK10 Adds RTK 10/10 option
SW-TRI-BD982-RTK Adds Real Time Kinematics s RAW
Data output
SW-TRI-BD982-RAW Adds RAW data output for post processing
SW-TRI-BD982-BEIDOU Adds Beidou constellation support
SW-TRI-BD982-GALILEO Adds Galileo constellation support
7/30