SplitBox
– User Manual
SPLITBOXUM.1.2
7.2.2.2. Ekinox/Apogee Main
The connector used is a Fischer Connectors Alulite receptacle similar to the one used on the Ekinox and
Apogee devices.
Its reference is: AL1731-DBPU-104-A092PB11-12G13
Pin #
Name
Description
Shield
Shield
Connected to the mechanical ground
1
GND
Connected to the main connector electrical ground
5
GND
Connected to the main connector electrical ground
7
GND
Connected to the main connector electrical ground
2
GND
Connected to GND to select RS-422 mode
3
Sync Out A
Synchronization output signal A
4
Sync Out B
Synchronization output signal B
6
Sync In A
Synchronization input signal A
8
Port A – RS-422 - Rx+
Port A serial input data / configuration RS-422
9
Port A – RS-422 - Rx-
Port A serial input data / configuration RS-422
10
Port A – RS-422 - Tx-
Port A serial output data / configuration RS-422
11
Port A – RS-422 - Tx+
Port A serial output data / configuration RS-422
14
CAN H
CAN bus 2.0 high line
15
CAN L
CAN bus 2.0 low line
16
Ethernet Tx+
Ethernet data link
17
Ethernet Tx-
Ethernet data link
18
Ethernet Rx-
Ethernet data link
19
Ethernet Rx+
Ethernet data link
22/30
