SBG Systems Exinox Subsea Series, Руководство по оборудованию

Страница: 14 / 42

Ekinox Subsea – Hardware Manual EKINOXSUBSEAHM.1.4
3.1.3. Origin of measurements
The center of measurement for acceleration, velocity and position is represented on the mechanical outlines
by the symbol. It is referenced to the base plate fine alignment hole.
3.1.4. Device label
SBG Systems manufacturing process is based on EN-9100 system with individual and full traceability of
every component and operation. Each Ekinox is identified by a unique serial number that can be used to
trace all operations during the product lifetime such as manufacturing, calibration, tests and repairs.
In addition to a unique serial number, a product code is used to define exactly the device type and options.
Finally, the Ekinox features an Ethernet interface and a unique MAC address is required to identify the
device on a network.
You can find on the back side of the Ekinox a laser printed label that hold all these identification
information. This label also includes a data-matrix code that encodes the device unique serial number.
14/42
Figure 3.1: Ekinox device label sample
EKINOX
Subsea Motion Reference Unit
Made in France
Product code
Serial Number
MAC Address EKINOX-M-G4A1-PS-ES-I1
024000000
98:5C:93:00:00:00 :
:
: