QUICK START
Smoke Detector Camera : SB-SK540
Page 3
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
The Smoke Detector Camera must have an SD card inserted to work properly. It will accept an
SD card of up to 32 GB in size.
1. The SD card is inserted into the side of the device. You do not need to remove the top of the
device.
2. Note the proper position of the SD card. The Gold connectors will be facing UP.
3. Gently insert the SD card, into the slot on the side of the device. Use your finger to gently
push the SD card into place. If there is resistance, remove the SD card and double-check
your placement. DO NOT FORCE your SD card into place. This may damage your device
and void your warranty.
BEFORE FIRST USE - SD CARD
Step 2
Gold-side UP
4. Use the tip of a screwdriver or similar tool. Press gently on
the middle of the SD card until the SD card clicks into place.
5. When properly inserted, the SD card is hidden from view. To
remove, use the tool to gently press again. The SD card will
click out of the slot.
Step 3
Step 4
Step 5
