Saxun Eros Blind, Техническое руководство

Страница: 17 / 32

17
TECHNICAL MANUAL EROS
1. Safety and responsibility
Before installing and using the product, read this guide
carefully.
A property motorisation and automatisation professional
must carry out the installation of this Somfy product. This
guide is directed at such professionals.
The installer must also comply with the standards and regu-
lations in force in the country of installation and must inform
their clients of the terms and conditions of use and mainte-
nance of the product.
Any use differing from the application established by Somfy
shall be considered prohibited use. This, along with any
breach of the instructions contained in this guide, shall
lead to the exemption of Somfy from any responsibility and
guarantee.
Before its installation, check the compatibility of this product
with the associated equipment and accessories.
2. Specific safety regulations
In addition to the safety standards described in this guide,
the instructions detailed in the attached document, titled
“Safety standards that must be respected and conserved”
must be followed.
3. To avoid damaging the motor:
Do not submerge.
Do not drill.
2. SAFETY
Cut the electrical power to the awn-
ing before performing any mainte-
nance procedures.
Avoid knocks.
Avoid operation in the case of
formation of ice on the screen.
Avoid dropping.
1. Motor preparation
1.1 Insert the crown (A) and the wheel (B) into the motor.
1.2 Measure the length (L1) between the inner edge of the
motor head and the end of the wheel.
2. Tube preparation
2.2 Cut the tube to the required length.
Remove burrs and shavings from the rolling tube.
2.3 For smooth tubes, make a notch according to the
dimensions indicated: - e = 4 mm I - h = 28 mm .
3. INSTALLATION
The Sunea io must be installed in a location that is protected from the elements.