250310
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Glass parts - Remove and wash in warm water or just use a damp cloth. Do not use abrasive materials as these
will damage the finish.
To prolong the life and keep your outdoor lighting in good condition, it is recommended that periodically it is
cleaned using a soft cloth followed by the application of a light coating of oil, such as WD40.
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
For your safety, always switch off the supply before maintaing this product.
This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.
Saxby Lighting Ltd. BH23 3PE
Care and Cleaning
Recycling Advice
Safety Information
The shade must be replaced immediately should the shade become cracked or damaged. This
fitting must not be used without the shade in place.
Replace Cracked
Shade
Fitting / Replacing Bulbs
Commissioning
6.
6.
8.
10. Locate the casing in the correct position in the housing and secure in place. Refit the reflector.
11. The angle of the bulb can be adjusted in one plane by ±15˚. Set the angle by gently pushing the lampholder to
the desired postion.
12. Refit the glass in position, ensuring that the seals are correctly located. Refit the rim.
13. Replace fuse or circuit breaker and switch on. Your light is now ready for use.
When changing a bulb, always switch off at the mains and allow the bulb to cool before handling. Dispose of used
bulbs carefully. Do not exceed the wattage stated or use a different shape bulb from that indicated on the fitting.
Unscrew the four screws on the front bezel using the supplied tool. Lift off the bezel and glass and set aside.
Push the bulb in to the lampholder and twist anticlockwise to remove. To refit bulb, reverse procedure.
Ensure that the seal is fitted in position with the grooves facing down before refitting decorative bezel.
GU10 240V
50W MAX
GU10 240V
20W MAX
7W MAX GU10
LOW ENERGY LAMP
3W MAX GU10
LED LAMP
Содержание Aretz GU10 Recessed
Страница 1: ...Aretz GU10 Recessed 7006GU10...
