SawStop TSA-SA70, Руководство пользователя

Страница: 60 / 104

54
TSA-SA70 OWNER’S MANUAL
1
2
Position the crosscut fence (C) near
the front of the sliding table (M) , with
the beveled end on the right (near
the table saw), the smooth face
resting on the sliding table, and the
crosscut fence ruler facing the rear
of the saw.
Position the fence pivot assembly
(O) next to the beveled end of the
crosscut fence (C) (the right end),
with the lock handle on the right.
Installing the Crosscut Fence Assembly
For installations WITH OR WITHOUT the extension wing.
Requires:
Hardware Bag 4 (p.5)
4mm Hex Wrench
C
M
C
O
3
Align the T-nut in the fence pivot
assembly
(O) with the right end
of the T-slot on the face with two
holes. If necessary, loosen the T-nut
to provide clearance for the walls of
the crosscut fence. C
O
WITH WITHOUT
EXTENSION WING
OR