Sawotec Tower TH2-30NB-CNR, Руководство пользователя

Страница: 25 / 28

25
ENGLISH
Heating of the sauna
CAUTION!
Smoke and odor formation when heating up for the first time Work materials from the
manufacturing process will be present on the new heating elements. These evaporate when the
sauna heater is heated up for the first time. This produces smoke and an unpleasant odor.
Breathing in the fumes or smoke can be harmful to your health.
Perform the following steps when operating the sauna heater for the first time and if the heating
elements for the sauna heater have been changed. In this way you will prevent damage to health
due to the fumes and smoke produced when heating up for the first time.
1. Select the highest possible temperature in the sauna control.
2. Heat up the sauna heater for half an hour. Do NOT stay in the sauna cabin during this period.
3. Allow the sauna cabin to ventilate thoroughly after heating up for the first time.
4. If no smoke or odor is produced the next time the sauna heater is heated up, you can start to
use the sauna. If smoke or odor is produced again, leave the sauna cabin immediately and
repeat the initial heating up process followed by ventilation.
Always check the sauna room before switching sauna heater on (to be sure that there is no
combustible things within the
safety distances of the heater or on the heater ). Make sure that
sauna room has been efficiently ventilated. If the output of the heater is proper it will take about an
hour to reach suitable temperature (Fig. 7). The temperature in sauna room should be between
+60 - + 90 °C, according to the preference of user. Too powerful heater will heat sauna room too
quickly and the stones won't have enough time to warm. The water poured on the stones will not
evaporate, but flow into the stone holder. An underpowered heater, on the other hand, would lead
to an undesirably long heating period.
If this sauna heater is used for public saunas or saunas that may be switched on by a separate
remote-control system/ the door of the sauna room must be fitted with an interlock such that the
stand-by mode setting for remote operation is disabled if the sauna door is opened when the
stand-by mode setting for remote operation is set.
Malfunctions
If heater doesn't work, check the following:
- Check the instructions for the separate control unit