Sawotec ARI WALL HEATER ARI3-45NB WL, Руководство пользователя

Страница: 27 / 32

ENGLISH
27
dIAgNoSTIC TAbLE
If heater is not heating up or sauna room is heating up slowly:
Nb-modELS:
• Is timer set to the operating range?
• Is the timer On? Is timer knob stuck? (Suitable gab is 1 - 2mm between knob and
heater body) If necessary, pull out the knob couple of millimeters.
• Is the thermostat set to higher than temperature inside the sauna room?
• Is the temperature fuse defective? Find out the reason before turning on your
heater again.
• Are all heating elements glowing red when the heater is ON?
• Is the heater’s heating power enough for the sauna room? (See page 28)
• Are the sauna stones laid properly? Is there enough space for air circulation and
stones are in good condition? If stones are laid loosely, sauna will warm up faster.
• Is the air circulation enough in the sauna room? (See page 21)
NS- ANd NI-modELS:
• Is the control unit ON?
• Is the set temperature higher than the temperature inside the sauna room?
• Is the main switch ON? In Ni-models, main switch is located at the bottom of the
heater, and in NS-models it is on the power control.
• Are the switchboard fuses ON and unbroken? If broken, find out the reason before
turning ON your heater.
• Are all heating elements glowing red when the heater is ON?
• Is the heater’s heating power enough for the sauna room? (See page 28)
• Are the sauna stones laid properly? Is there enough space for air circulation and
stones are in good condition? ? If stones are laid loosely, sauna will warm up faster.
• Is the air circulation enough in the sauna room? (See page 21)
If THE SuRfACES dARkEN ARouNd THE HEATER:
• Is the heater installed following the safety distances? (See page 9)
• Have you laid the sauna stones correctly and there is enough space between the
stones for air circulation? If air circulation is blocked constructions around the
heater might over heat.
• Are the heating elements visible behind the stones? Re-lay if necessary.
• If you cannot find the reason, contact your retailer